Introduction
When selecting heavy-duty CNC machinery for large workpiece machining—such as mining machine bodies, steel castings, or complex structural frames—two machine types often top the list: Horizontal Boring & Milling Machines (WT Series) and Horizontal Machining Center (WJ Series).
While both excel at processing heavy, high-precision industrial components, their structural designs and ideal applications differ significantly. Understanding these differences will ensure you choose the right machine for maximum production efficiency.
1. Real-World Case: Machining a Jaw Crusher Movable Jaw
Take the heavy steel casting shown above—a Movable Jaw (Pitman)
for a Jaw Crusher: 

The Challenge: It features a large, deep main bearing bore (eccentric shaft hole) requiring precise concentricity and strict sizing tolerances, alongside heavy outer surfaces and locating slots that need precision milling.
The Solution:
Machining the deep main bore requires an extendable boring spindle (W-axis) to reach deep into the hole without collision, making the WT-1616 Horizontal Boring and Milling Machine the ideal match.
Milling the large outer mounting faces and side slots calls for high-power surface milling, where the WJ Series Horizontal Machining Center excels.
2. Structural Difference: The Power of the W-Axis
The fundamental difference between these two machine types lies in the spindle construction:
WT-1616 (Horizontal Boring and Milling Machine): Equipped with a extendable boring spindle (W-axis) with a 550mm travel distance. This allows the cutter to extend deep into narrow cavities, inner chambers, and deep-hole systems (like the main bore in the Jaw Crusher Pitman) without tool interference.
WJ Series (Horizontal Machining Center): Features a high-rigidity fixed spindle structure without a W-axis. The 3-axis motion provides superior structural stability for heavy surface milling and large plate face-milling.
3. Spindle Performance: Heavy Torque vs. High Speed
Depending on your material removal requirements, each series offers distinct spindle characteristics:
| Feature | WT-1616 (Boring Machine) | WJ Series (Gantry Mill) |
| Max Spindle Speed | 1,000–1,200 RPM | Up to 2,500–6,000 RPM |
| Spindle Torque | Up to 3,200 Nm (High Torque) | Standard High-Power Milling |
| Motor Power | 15 / 18.5 kW | 30 / 37 kW (High Power) |
| Machining Focus | Low-speed heavy boring & deep hole processing | High-speed, high-efficiency surface & contour milling |
4. Workpiece Capacity & Application Breakdown
Choose WT-1616 if you manufacture:
Mining & Crusher Components: Jaw crusher movable jaws, crusher frames, and heavy pitmans requiring high-precision concentric boring.
Gearboxes, Pump Housings & Valve Bodies: Complex box-type structures where inner cavity access is required.
Deep Hole Boring: Precision hole-series machining over long axial distances.
Choose WJ Series if you manufacture:
Large Mold & Die Bases: Automotive molds, stamping dies, and injection molds requiring smooth surface finishes.
Heavy Steel Plates & Base Structures: Large-area flat surface face-milling with high efficiency.
Structural Machinery Components: Jobs requiring rapid material removal across large travels (up to 2000mm) with table loads up to 15,000 kg.
Conclusion: Matching Machine to Material
If your bottleneck is inner bore alignment, deep cavity milling, or heavy low-RPM metal removal, the WT-1616 Horizontal Boring and Milling Machine is your optimal choice.
If your priority is high-speed surface milling, heavy load capacity, and versatile 3-axis contouring, the WJ Series Horizontal Machining Center will maximize your throughput.
Need a custom machining solution? Contact our technical engineering team today to analyze your workpiece drawings and configure the ideal machinery for your shop floor!
FAQ
Q1: What is the main structural difference between the WT Series and WJ Series?
A: The primary difference lies in the W-axis (extendable boring spindle). The WT-1616 features a boring spindle that can extend forward up to 550mm, allowing high-precision machining deep inside hollow workpieces or narrow cavities. The WJ Series features a rigid, fixed spindle structure optimized for maximum stability during high-speed 3-axis surface and contour milling.
Q2: Can a Horizontal Machining Center (WJ Series) perform boring operations?
A: Yes, the WJ Series can handle standard, shallow hole boring using standard boring tools or interpolating with milling cutters. However, for deep-hole boring or complex inner-chamber hole alignment (like the main eccentric bore in a jaw crusher pitman), the WT Series with its extendable W-axis and high low-end torque (3,200 Nm) is far more efficient and accurate.
Q3: Which machine is better for machining heavy steel castings like crusher parts or pump bodies?
A: It depends on the feature you are machining:For deep bore alignment and inner cavity features, choose the WT-1616 Horizontal Boring Machine. For large flat surface milling, side slotting, and external contouring, choose the WJ Series Horizontal Machining Center.
Q4: What are the main advantages of high spindle torque vs. high spindle RPM?
A:High Torque (WT-1616 - 3,200 Nm at 1,200 RPM): Ideal for heavy-duty rough cuts, tough materials (cast steel/iron), and large-diameter boring tools where cutting resistance is extremely high. High RPM (WJ Series - up to 6,000 RPM): Ideal for fast material removal rates, finer surface finishes on large plate surfaces, and using smaller tools at higher feed rates.
Q5: Can I customize the worktable size or Z-axis travel for these models?
A: Yes! Both series offer optional configurations to meet specific workpiece dimensions. For instance, the WT-1616 offers an optional 1400×1200 mm rotary table and Z-axis travel up to 1600mm. The WJ Series also supports optional rotary tables and higher column clearance for tall workpieces.