Technical Guide to Plastic Mold Making: Material Selection (1.2085 vs P20 vs 1.2738) and CNC Controller Matching (FANUC vs Siemens vs Mitsubishi)

Category: Blog Author: ASIATOOLS

1. Introduction

1. 1Mold Steel Selection: Corrosion Resistance, Thermal Conductivity, and Section Hardenability

Selecting the right mold steel requires evaluating resin properties (such as chemical corrosiveness and fillers like glass fiber), mold dimensions, and expected production volume.

①1.2085 (420FM): Pre-Hardened Stainless Steel with Superior Machinability

Chemical Profile: Modified from 1.2083 (AISI 420) by adding sulfur (S: 0.05%–0.10%).

Key Advantages: Delivered pre-hardened at 30–36 HRC. The addition of sulfur significantly enhances machinability, reducing tool wear and cutting cycle times while maintaining good baseline corrosion resistance.

Best Fit: Ideal for mold plates, mold bases, and moderate-polish cavities operating in humid environments or processing mildly corrosive plastics (e.g., PVC).

Limitations: Due to sulfur inclusions, its polishability is lower than 1.2083, making it unsuitable for high-grade optical mirror finishes.

②P20 (1.2311) vs 1.2738 (P20+Ni): Standard Pre-Hardened Mold Steels Compared

P20 and 1.2738 are the two most widely specified pre-hardened steels in plastic molding:

Performance MetricP20 (1.2311)1.2738 (P20+Ni)Engineering Implications
Delivery Hardness28–32 HRC30–38 HRC1.2738 offers higher matrix strength
Nickel (Ni) Content~0.45%~1.05% (More than double)Higher Nickel enhances core hardenability in large blocks
Thermal ConductivityHigher (~29–32 W/m·K)Moderate (~20–24 W/m·K)P20 dissipates heat faster, shortening injection cycle times
Max Applicable SectionRecommended ≤ 400 × 300 mmUp to 600 × 500 mm+1.2738 prevents "hard skin, soft core" issues in large blocks
Wear & PolishabilityStandard unfilled plasticsSuperior wear resistance, polishable to Ra 0.2 μm1.2738 handles glass-filled resins (e.g., PA66+30%GF) better

2 CNC Controller Matching: From Machining Efficiency to Complex Surface Precision

Tooling quality relies heavily on the CNC controller's interpolation algorithms, look-ahead features, and operational ergonomics.


2.1 FANUC: First Choice for Standard Mold Bases & High-Stability Shops

Positioning: Largest installed base, exceptionally low failure rates, and high operator familiarity.

System Synergy: Excellent for mold base machining (drilling, tapping, rough milling) and 3-axis/4-axis cavity work. When paired with 1.2085 free-machining stainless steel, it maximizes milling throughput.

Recommended Models: 0i-MF Plus for standard 3/4-axis milling; 31i-B5 / 30i-B Plus for high-speed, high-precision 5-axis mold making.

2.2 Siemens: Superior Performance for Complex Surfaces & 5-Axis Tooling

Positioning: Industry-leading advanced interpolation, intuitive ShopMill programming, and mature RTCP (Rotate Tool Center Point) control.

System Synergy: Optimal for automotive body panel molds, complex freeform surfaces, and multi-axis machines. When machining large 1.2738 deep-cavity molds, Siemens' dynamic tuning and thermal compensation ensure smooth surface transitions and excellent surface finishes.

2.3 Mitsubishi: Balanced Value and Practical High-Speed Finishing

Positioning: Widely adopted across Asia-Pacific supply chains, offering fast servo response, cost efficiency, and practical high-speed, high-accuracy control functions.

System Synergy: Well-suited for small-to-medium precision plastic molds and 3C electronic molds. It maintains smooth motion control during long G-code (G01) high-speed interpolation programs.

3. Integrated Tooling Recommendations

To optimize ROI, mold makers should align material selection directly with the appropriate CNC machining system:

3.1Corrosive Environments / Standard Mold Base Machining:

Recommended Combo: 1.2085 Steel + FANUC 0i-MF Controller

Rationale: Leverages the high machinability and rust resistance of 1.2085 alongside FANUC’s efficient drilling/milling workflow to shorten mold base manufacturing cycles.

3.2High-Volume, Fast-Cycle Standard Plastics:

Recommended Combo: P20 Steel + FANUC / Mitsubishi Controller

Rationale: P20’s higher thermal conductivity reduces injection cooling times, while standard FANUC/Mitsubishi systems ensure reliable, cost-effective machining.

3.3Recommended Combo: 1.2738 Steel + Siemens (SINUMERIK) / High-End FANUC Controller

Rationale: 1.2738 delivers uniform core hardness and wear resistance across large cross-sections; advanced CNC controllers prevent cutter marks during long finishing passes, resulting in superior surface quality and extended mold life.

FAQ

Q1: What are the respective application scenarios for the three mold steels: 1.2085, P20, and 1.2738?

1.2085 (420FM): Pre-hardened stainless steel with superior machinability and good corrosion resistance, ideal for mold plates, mold bases, and moderate-polish cavities operating in humid environments or processing mildly corrosive plastics (e.g., PVC).

P20 (1.2311): Standard pre-hardened mold steel with higher thermal conductivity (~29–32 W/m·K), suitable for standard unfilled plastics to accelerate heat dissipation and shorten injection cycle times.

1.2738 (P20+Ni): High-nickel pre-hardened steel with strong core hardenability, good wear resistance, and superior polishability (up to Ra 0.2 μm), ideal for large blocks, deep-cavity molds, and glass-filled resins (e.g., PA66+30%GF).

Q2: What are the main advantages and limitations of 1.2085 steel?

Advantages: Delivered pre-hardened at 30–36 HRC; the addition of sulfur (S: 0.05%–0.10%) significantly enhances machinability, reducing tool wear and cutting cycle times while maintaining good baseline corrosion resistance.

Limitations: Due to sulfur inclusions, its polishability is lower than 1.2083, making it unsuitable for high-grade optical mirror finishes.

Q3: Why is 1.2738 recommended over P20 for large-section molds (e.g., greater than 400 × 300 mm)?

P20 is recommended for sections ≤ 400 × 300 mm.

1.2738 has a higher nickel content of approximately 1.05% (more than double that of P20), which enhances core hardenability in large blocks (applicable up to 600 × 500 mm+) and prevents "hard skin, soft core" issues.

Q4: What are the characteristics of the three mainstream CNC control systems (FANUC, Siemens, Mitsubishi)?

FANUC: Largest installed base, exceptionally low failure rates, and high operator familiarity, making it optimal for standard mold base machining (drilling, tapping, rough milling) and 3-axis/4-axis cavity work.

Siemens: Industry-leading advanced interpolation, intuitive ShopMill programming, and mature RTCP control, delivering superior performance for complex surfaces and 5-axis tooling.

Mitsubishi: Balanced value and practical high-speed finishing widely adopted across Asia-Pacific supply chains; maintains smooth motion control during long G-code (G01) high-speed interpolation programs, well-suited for small-to-medium precision plastic molds and 3C electronic molds.

Q5: Which control system is recommended when machining automotive body panels or large deep-cavity molds?

Siemens (SINUMERIK) or a high-end FANUC controller is recommended. Their dynamic tuning and thermal compensation ensure smooth surface transitions, preventing cutter marks during long finishing passes for superior surface quality and extended mold life.